FIRETECT FIRE-POOF™

Flame Retardant for Fabric, Wood, and other Materials

Fire-Poof™ is an interior non-hazardous, water based flame retardant for raw wood and most textile fibers and other OEM uses. Fire-Poof™ is easy to use and has no smell; one product for most fibers. No need to buy more than one product. Covers 200-800 square feet per gallon depending upon the density of the fiber. It is odorless and leaves no greasy film. Fire-Poof™ can be used on most fibers except some acetates, acrylics and nylons. Apply with an air sprayer, under 100 PSI. Works excellent on paper, cardboard, and other decorative materials.

Class 1 or Class A flame retardant on raw wood when applied at 150 square feet per gallon. Class 2 or Class B when applied at 250 square feet per gallon.

  • Appearance - and appearance of water
  • Do not expose to heat above 300º f. after application
  • Store between 40° and 100°F. Shelf life, 5 years if unopened
  • May need up to 24 hrs. to cure depending upon fiber characteristics
  • Fire-Poof™ is water-soluble. It is recommended that all fabrics be dry-cleaned
  • Weight - 5-gallon pail is 50 lbs (ready to use), ph=6.5-7. Available in all quantities
  • Water based product, use caution when product comes in contact with metal as it may cause corrosion
  • Do not add water or change chemical composition in any way. Always make sure cap stays on container
  • Certification requires application by a California State Certified Applicator to comply with requirements of the CA State Fire Marshall
Item Designations: