The Acid Airless 2-Way Foamer is a 1.3 GPM @ 40 PSI foam applicator for applying 2 highly corrosive chemicals, such as those used to remove concrete and for aluminum brightening, without compressed air.  This acid-resistant venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend a high concentration of acid into the water stream to create a strong solution.  The solution then flows through the discharge hose to the "airless" foam wand which draws in atmospheric air to create and project wet, clinging foam on to any surface. Use the chemical ball valves to inject the 2 chemicals separately or simultaneously.

• No compressed air required
• Flow rate of 1.3 GPM @ 40 PSI
• Achieves strong concentrations up to 4:1 (no tip)
• Weaker dilution ratios controlled by precision metering tips up to 297:1
• Designed to apply 2 separate chemicals or 2 different concentrations of the same chemical
• Chemicals can be applied separately or simultaneously by adjusting the ball valves
• Projects wet clinging foam which increases chemical contact time and effectiveness
• Foaming expands the chemical and reduces over-application by providing visual assurance of coverage
• Use it where 35 - 125 PSI water is available
• Corrosion resistant components ensure durability and years of reliable service 
• Includes Polypropylene mounting bracket and cover, PVC inlet and discharge ball valves, Machined polypropylene injector body
• Includes 20 color-coded precision metering tips to set dilution ratios and a 50' foam hose & polypropylene extended airless foam wand

Excellent for applying Bright-Crete Green to ready-mix concrete trucks and equipment.  Excellent for applying Bio-Electrolyte Cleaner, D.L.R., and other low pH solutions.

Compatible with Wash-N-Shine, Brute, Super Vehicle Wash, ProFlex products, T and T Truck & Trailer Wash, and other detergents and degreasers