RUBBER-BASED CLEAR SEAL (WITH OR WITHOUT GRIT)

RUBBER-BASED CLEAR SEAL (WITH OR WITHOUT GRIT)

Epoxy-Tough, One-Part Concrete Sealer and Coating
RUBBER-BASED CLEAR SEAL (WITH OR WITHOUT GRIT)

1-Part, solvent-based, non-skid concrete sealer and coating.  Deep-penetrating, non-chlorinated, clear rubber resin formula is 20% solids and self-levels to produce a durable high gloss.  Functions as both a sealing and curing membrane on new concrete and masonry, as well as a waterproof seal to protect old concrete, wood, brick, and stone from moisture damage and soil stains. Recommended for use on concrete floors, parking decks and ramps, bridges, pavers, and walkways.  Cleans up with Momar's Honey Badger. 

  • For interior and exterior use
  • Available with or without grit
  • Dries epoxy-tough in 4 hours
  • 1 gallon covers up to 400 square feet
  • Stops concrete dusting and efflorescence
  • Contains UV inhibitors so it will not yellow
  • Acid, alkali, glycol, salt, oil, grease, and abrasion resistant

When ordering "with grit," the fine ground glass grit will not be premixed into the coating.  The grit can be added to the liquid coating at a rate of 8 ounces of grit per gallon of product - stir continuously or the grit will settle to the bottom.  Alternatively, the grit can be broadcast over the applied product immediately after application prior to drying.

Item Designations:

RUBBER-BASED CLEAR SEAL (WITH OR WITHOUT GRIT) is prohibited for sale into the states listed below.
CA , CO , CT , DC , DE , IL , IN , MA , MD , ME , NH , NJ , NY , OH , PA , RI , UT , VA , WI
See your Momar Representative for alternative solutions or contact us for more information.